- Deodorizing cat litter tofu litterLynxmotion Johnny 5 Combo Kit - J5C-KT

Title Default Title
Qty:

Description

  • Indoor and Outdoor Tracked Robot Platform
  • Designed for indoor or outdoor use and performs well on many different surfaces
  • Its a very cool and completely functional model of the ever popular movie robot
  • No software included - SSC-32 Servo Sequencer Utility available

The Lynxmotion Johnny 5 Robot Kit is a very cool and completely functional model of the ever popular movie robot. The robot is designed for indoor or outdoor use and performs well on many different surfaces. You can control the robot from a PC with the included DB9 cable, or use a Bluetooth Modem for wireless PC control.

Lynxmotion Johnny 5 Combo Kit - J5C-KT

 Powering Options

The robot is compatible with the following batteries and chargers.
Accessories

  • Quick Connect Battery Connector
  • WH-01 Wiring Harness with Battery Connector

Batteries & Chargers

Servos

  • 6V, 2800mAh, NiMH Battery

Sabertooth and Motors

  • 12V 1600mAh Rechargeable NiMh Battery
  • 12.0V 2800mAh Rechargeable NiMh Battery Pack

Charger

  • 6V - 12V NiMH / NiCd Smart Charger

SSC-32 Servo Sequencer Utility (created using FlowBotics Studio)

The Lynxmotion SSC-32 Servo Controller board can be easily controlled with the new SSC-32 Servo Sequencer Utility. It is available as a free downloadable utility which makes it easy to experiment with robotics and animatronics.  It can be found in the Useful Links section.

This utility is an example of the type of program which can be built using FlowBotics Studio (Download)which includes this program as an open source demo project. The SSC-32 Servo Sequencer Utility program enables you to easily move servo motors, calibrate their position, store and playback motion sequences, upgrade the SSC-32 firmware and more.

  • Johnny 5 Torso, which includes: Johnny 5 Torso Kit, Base Rotate Kit, Multi-Purpose Sensor Housing, 2 x Robot Hand - A (NS)
  • Servos: 8 x HS-645MG, 3 x HS-485HB, 3 x HS-422
  • Tri-Track Chassis Kit (NE) (RB-Lyn-212)
  • Sabertooth 2X5 R/C Motor Controller
  • SSC-32U USB Servo Controller
  • SSC-32 Sequencer Software
  • DB9 Serial Data Cable

Note: batteries and "eyes" not included

Website

FREE Utility

  • SSC-32 Servo Sequencer Utility (created using FlowBotics Studio)

Length = 10.00"
Width = 11.00"
Height (Overall) = 14.25"
Height (Base and torso) = 11.75"
Ground Clearance = 1.00"
Deck Height = 3.00"
Deck Dimentions = 7.25" W x 8.125" D
Weight = 6.25 lbs (no batteries)
Speed = 24.0 in/sec